Filter
Top Products
www.zephyronline.com
Models: ASU-M90ASX and ASU-E42ASX
1. Install the electrical wiring and test hood for functions prior to installing the
duct covers.
2. If using hood in air recirculating mode make sure to install the air diverter
plate prior to mounting the duct covers. See the manual included with the
recirculating kit for more instructions.
4. Secure duct cover bracket to top of wall just below the ceiling using (2 type
D) screws provided. See Fig. 12
5. Place ducting from ceiling over
the collar on top of the hood
and secure using aluminum
duct tape. See Fig.14
6. Insert top duct cover into bot-
tom duct cover.
7.
Place duct covers over hood
body. Fig16 Slide duct covers
towards the wall and make sure the lip of the
bottom duct cover slides under the metal lip on
top of the hood body.Fig.17
8. Extend top duct cover up and secure to the
duct cover bracket using (2 type C) screws. See
Fig. 15
9. Secure bottom duct cover to the hood using
the (2 type B) screws provided. Fig.18
Installation - Mounting the Duct Cover
- 24 -