Filter
Top Products
Pass the wires of the remote motor throu-
gh the terminal box hole and connect
them to the connector wires. Fig.8B
Note: Carry out the power supplly con-
nection in accordance with the natio-
nal electric code, ANSI/NFPA 70-1999.
Note1: A cable lock (not included) may
be required by local codes. Please re-
view local codes for more information.
11. Attach 6 pin male molex connectors
to 6 pin female molex connectors insi-
de blower housing. See Fig. 9
Note2: Check local codes to determine
minimum wire gauge.
See manual included with external
and in-line blower for instructions
on installing the blower.
Installation - External & In-Line Blower Preparation
- 15 -