Zephyr AK8100AS Ventilation Hood User Manual


 
Maintenance – AK8000AS Recirculating Kit
13
DUCTLESS RECIRCULATING (AK8000AS ONLY):
Ductless recirculating is intended for applications where an exhaust duct work is not possible to be installed.
When converted, the power pack functions in air “purifying” mode rather than exhausting the air. Fumes and
exhaust from cooking is drawn and fi ltered by a charcoal fi lter. The air is then purifi ed and recirculated back
into the kitchen.
We recommend to always exhaust air outside of the home by employing existing or installing new duct work,
if possible. The power pack is most effective and effi cient as an exhaust unit. Only when the exhaust option
is not possible should you use the power pack in recirculating mode.
When converted to recirculating mode, a charcoal fi lter is required to be installed on top of the standard metal
mesh fi lter and a return air vent is needed to direct air back into the kitchen. The standard metal mesh fi lter is
intended to capture residue from cooking and the optional charcoal fi lter helps to purify fumes exhausted from
cooking in recirculating mode.
Purchase recirculating kit as follows, for AK8000AS ONLY:
Hood Model: Part No. Qty. to Order
AK8000AS ZRC-0100 1
Charcoal fi lters must be replaced approximately every 3 months based off an average usage of 1 hour a day.
Order replacement charcoal fi lters as follows:
Hood Model: Part No. Qty. to Order
AK8000AS Z0F-C022 1
For detailed installation instructions please refer to manual included with recirculating kit.
Install charcoal filter (plastic side up) into
filter bracket. Insert tab cut-out side D of
charcoal filter into bracket first. Lock
charcoal filter into place by pushing down
on side E with locking tabs.
D
E