A SERVICE OF

logo

380 CHAPTER 19: ACL CONFIGURATION
For more about the commands, refer to the Command Reference Manual.
Only the numbered basic ACL can be called for WEB NM user control.
Configuration Example Networking Requirements
Only permit Web NM user from 10.110.100.46 access Switch.
Networking Diagram
Figure 100 Controlling Web NM users with ACL
Configuration Procedure
1 Define the basic ACL.
[SW5500]acl number 2030 match-order config
[SW5500-acl-basic-2030]rule 1 permit source 10.110.100.46 0
[SW5500-acl-basic-2030]quit
2 Call the basic ACL.
[SW5500]ip http acl 2030
Table 402 Calling ACL to Control HTTP Users
Operation Command
Call an ACL to control the WEB NM users. ip http acl acl_number
Cancel the ACL control function. undo ip http acl
Internet
Switch