A SERVICE OF

logo

Open as PDF
next previous
Configuring Interface Modules
99
Reset Interface Card
Reset the interface module in a specific slot, or all the interface module.
Command Actions
Command Result
Example
Enter:
1 5 6
0
The following prompt is displayed:
Do you really want to reset all the interface cards (Y/N)?
Enter
y
to confirm. The following message is displayed:
All the interface cards were reset.
Enter the menu sequence:
(1) SYS: Platform Configuration
(5) IFC: Interface Cards
(6) RST: Reset Interface Card
Enter a parameter at the prompt
Parameter Format or Range
Slot Number 1 - 16 or 0 for all
Direct access sequence:
1 5 6
[parameters]
System action taken:
The selected interface module is reset.
System message display:
The interface card was reset.