Configuring Replication for the VCX Data Server 31
Configuring
Replication for the
VCX Data Server
This section provides instructions on how to setup replication, check
replication, delete replication errors, and drop replication for the VCX IP
Telephony Server data server.
Setting Up
Replication for a VCX
Data Server
This section provides instructions on how to setup replication for a VCX
data server. This will only setup replication in one direction. You need to
repeat these steps for each set of VCX data servers you want to
replication between.
1 From the EMS client explorer tree, for the VCX data server you want to
connect to another VCX data server from, click 3Com VCX IP Telephony
Server.
2 In the right-hand pane, click the Replication Settings tab.
3 From the Master Def Site IP Address field, enter the IP Address of the
master definition site (usually the region 1 primary VCX data server).
4 From the Master Site IP Address field, enter the IP Address of the master
site (usually the region 2 primary VCX data server).
5 From the Site ID field, enter the site ID of the Region 1 VCX data server.
6 Click Save All.
7 Right-click 3Com VCX IP Telephony Server, select Database Replication,
and then click Setup Database Replication.
8 Repeat step 1
through step 7 to setup replication from the other
direction.
Dropping Replication
for a VCX Data Server
This section provides instructions on how to drop replication for a VCX
data server. This will only drop replication in one direction. You need to
repeat these steps for each set of VCX data servers you want to drop
replication between.
1 From the EMS client explorer tree, for the VCX data server you want to
drop replication from, click 3Com VCX IP Telephony Server.
2 Right-click 3Com VCX IP Telephony Server, select Database Replication,
and then click Drop Database Replication.
Repeat step 1
through step 2 for any other direction you need to drop
replication for.
