34 CHAPTER 1: 3COM VCX IP TELEPHONY SERVER
4 From the pop-up menu, select UPS Monitoring and then select
Enable UPS Monitoring.
To disable UPS monitoring, select Disable UPS Monitoring.
Viewing UPS
Monitoring
Information
To view UPS monitoring information:
1 Log into EMS.
2 From the Explorer tab, navigate to the 3Com VCX IP Telephony Server.
3 From the Properties tab, click UPS Monitoring.
Viewing UPS Slaves To view UPS slaves:
1 Log into EMS.
2 From the Explorer tab, navigate to the 3Com VCX IP Telephony Server.
3 From the Properties tab, click UPS Slaves.
Table 7 UPS Master Setup Parameters Tab
Attribute Description
BatteryCharge The percentage battery charge threshold in UPS before
starting a shutdown.
IPAddress1 IP address of the first UPS.
IPAddress1Community The community string of the first UPS.
IPAddress2 IP address of the second UPS.
IPAddress2Community The community string of the second UPS.
Table 8 UPS Slave Setup Parameters Tab
Attribute Description
IsMultipleUPSEnabled Determines if multiple UPSes are enabled.
UPSServerIPAddr The VCX server acting as a UPS monitor.
