MATERIAL SAFETY DATA SHEET
According to Reg. 1907/2006/EC, Reg. 543/2010/EC and Dir. 67/548/EC
BIBIELLE S.p.A. - Via Cuneo , 35 - 12040 Margarita (CN), Italy - Phone: +39 0171 793800
SURFACE CONDITIONING
DCR
State of revision: 3
Date: 07/09/2011
Pag. 2 of 5
4
FIRST AID MEASURES
Preamble
Following statements must be taken as base-rules concerning abrasive materials
and has to be completed according to safety data sheets of processed materials
and process cooling liquid used
General informations
In case of eyes and skin contact, give priority to eyes rst aid measures
Eye contact
Rinse opened eye for several minutes under running water and seek immediate
medical advice, showing this MSDS
Skin contact
Remove contaminated clothes. Immediately wash with water and soap and rinse
thoroughly.
Inhalation
Supply fresh air; consult doctor in case of complaints
Swallowing
No negative e ects in case of swallowing. Drink water and seek immediate
medical advice, showing this MSDS
5
FIRE FIGHTING MEASURES
Suitable extinguishing agents
CO
2
, extinguishing powder or water spray. Fight larger res with water spray or
alcohol resistant foam
Protective equipment
Ordinary protective equipment in case of re- ghting
Speci cal risks
None
6
ACCIDENTAL RELEASE MEASURES
Person-related safety precautions
Measures for environmental
protection
Measures for cleaning/collecting
n.a.
7
HANDLING AND STORAGE
Handling
Avoid direct contact using recommended handling safety equipment (see ยง 8).
According to normal use conditions, product does not contain volatile components
Storage
Keep in cool, dry, ventilated storage in closed original containers. Do not drink
or eat near the storage place
8
EXPOSURE CONTROLS / PERSONAL PROTECTION
Risk scenario
Any risk concerning the use in mechanical industry
Experimental toxicological data are not available concerning speci
cal exposure
scenarios. Hazard classi
cation of this product was done according to Reg. 1272/2008/EC
and other available informations
Information about design of
technical facilities
Ensure good ventilation/exhaustion at the workplace.
Safety washing water must be available
for skin and eyes
OSHA 2010
TWA [mg/m
3
]
ACGIH 2010
TWA [mg/m
3
]
latoT ecnatsbuS
Respirable
fraction
Inhalable fraction
Respirable
fraction
Silicon carbide 15 5 10 3
Corundum [Al
2
O
3
] 15 5 --- ---
Exposure limit values
Particles not otherwise
classi
ed
10 mg/m
3
inhalable fraction (TWA 8 h, ACGIH 2010)
3 mg/m
3
respirable fraction (TWA 8 h, ACGIH 2010)
ATD-3150, ATD-3151, ATD-3152, ATD-3153 & ATD-3154
