MATERIAL SAFETY DATA SHEET
According to Reg. 1907/2006/EC, Reg. 543/2010/EC and Dir. 67/548/EC
BIBIELLE S.p.A. - Via Cuneo , 35 - 12040 Margarita (CN), Italy - Phone: +39 0171 793800
SURFACE CONDITIONING
DCR
State of revision: 3
Date: 07/09/2011
Pag. 3 of 5
Respiratory protection
In case of brief exposure use respiratory lter device
Protection factor: P3
Eyes protection
Safety goggles or face shield
Hands protection
Protective gloves for chemical products, according to standard EN374; materials for long
contact time
Skin protection
Use protective clothes and protective shoes
Other informations
Abrasive materials used are inert and cannot cause risks when correctly stored and
managed. During use on machineries, they request safety precautions for workers. The
most part of powder particles comes from the processed material and eventually from the
cooling liquid. Consequently attention and safety precautionary measures on vapours and
dusts environmental removing must be applied
.
Follow the local Safety Management stan
dards and instructions
9
PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Solid abrasive material
sselruodO ruodO
.a.n HP
.a.n egrahC
.a.n tniop gnilioB
.a.n tniop gnitleM
.a.n tniop hsalF
Vapour pressure n.a.
Water solubility at 20°C Not soluble
Volatile organic chemicals (VOC) No volatile chemicals (VOC) are present at detectable level
Ripartition coe cient n-octanol/water
n.a.
10
STABILITY AND REACTIVITY
Stability
Stable in normal handling and storage conditions
Conditions/materials to avoid
Keep away from strong oxidizers and electrostatic charges
Dangerous decomposition products
After overheating and drying, thermical decomposition at °T > 250°C can produce
dangerous vapours as carbon dioxide, carbon oxide and nitrogen oxides
ATD-3150, ATD-3151, ATD-3152, ATD-3153 & ATD-3154
