BaracodaManager for PC – User Guide v3.39 - 27 -
Data Capture
for Workforce
in Motion
The following table shows the Other Settings buttons that you can set:
Access product settings (see below)
Access Bluetooth connection settings (see below)
Access types of barcodes settings (see below)
The table below shows the actions you can take with the buttons:
Close window with no changes.
Store and send the new parameters to the barcode reader.
Restore the factory settings. The barcode reader (flash) memory is erased and
the factory default parameters are restored. Check the device manual for
details.
Ugrade the reader’s firmware. Please check Chapter 16 for details.
8.1. Batch mode settings
Please note that the batch mode is supported on D-Fly with P/N value “B401202xx” (firmware v1.54 and
newer).
The Batch mode configuration displays three buttons and give the choice between:
1. Upload barcodes to a file
o Always upload to the same file, overwriting the previous content (“Overwrite last upload file”)
o Append data to last upload file (default)
o Generate a different file name for every upload (“Add timestamp to file name”)
2. Upload barcodes to an application window
(for more information see the paragraph “Uploading data stored in batch mode”)
Choose a file name and path to store the barcodes
Close Batch configuration window without saving any modifications
Save the modifications and close Batch configuration window
