BaracodaManager for PC – User Guide v3.39 - 47 -
Data Capture
for Workforce
in Motion
The following table shows the Shutdown Timer fields that you can set:
Set the delay (in minutes) after which the barcode reader switches off, when
the barcode reader is connected and without any activity.
Set the delay (in minutes) after which the barcode reader switches off, when
the barcode reader is not connected and without any activity.
The following table shows the Battery field:
Battery level (0-100%) and its current charging status.
The following table shows the Other Settings buttons that you can set:
Access product settings (see below)
Access Bluetooth connection settings (see below)
Access types of barcodes settings (see below)
Signature/image
configuration
Access the signature mode and picture mode configuration (only for 2D
readers with firmware version >= 1.47, see below)
The table below shows the actions you can take with the Data capture mode radio buttons:
Activates both the barcode scan engine and the RFID engine.
Activates the RFID engine and turns off the barcode scan engine.
Activates the barcode scan engine and turns off the RFID engine.
The table below shows the actions you can take with the buttons:
Close window with no changes.
Store and send the new parameters to the barcode reader.
Restore the factory settings. The barcode reader (flash) memory is erased and
the factory default parameters are restored. Check the device manual for
details.
Ugrade the reader’s firmware. Please check Chapter 16 for details.
