filtersanddisposeofthelargesolidsbyemptyinginto
awastebasket.Ifanyotheritemshavebeentrapped
bythefilters,paperlabelsforexample,theseshould
alsoberemovedwhileyouhavethefiltersoutofthe
dishwasher.Thesesmalleritemscanusuallybe
flushedoutunderrunningwaterif youhavetrouble
removingthembyhand.
After cleaning, reinsert the filters in the dishwasher
making sure to press the filters firmly into position
until you hear or feel them click into place.
Other areas requiring periodic maintenance are the
wash arms and the stainless steel tank and inner door:
• Wash arms
The wash arms should be checked on a regular basis to
assure that the spray orifices are clear and
unobstructed. If the wash arms require cleaning they
are easily removable:
> The lower wash arm simply snaps into place and
can be removed by pulling upwards.
> The upper wash arm is held in position by the
upper water tube. Remove the upper wash arm by
turning the upper water tube counter-clockwise
(I',). The water tube is slotted to allow the use of
a spoon, as shown in figure 11, to aid in turning
the tube.
After cleaning, reattach the wash arms by reversing the
|
Figure 11.
• Stainless Steel Tank and Door
The outer edges of the inside door panel should be
cleaned on a regular basis to remove food particles
that can gather there from normal loading.
If spots begin to appear on the stainless steel door or
tank check to make sure that the RINSE AGENT
RESERVOIR has rinse agent in it. Also it is possible
that the wash arms are blocked, which prevented the
door as well as your dishware from being properly
washed and rinsed. Check the wash arms to make sure
they are moving freely. If not, clear the obstruction
away so that the arms may rotate freely and then
rewash the load of dishes in the dishwasher.
Spots that appear on the stainless steel door may be
removed by wiping gently with a sponge sprinkled with
a stainless steel cleaner. Do not use metal scouring
pads to clean the stainless steel surfaces as these can
scratch the surface and leave metal fragments that can
rust.
SERVICE and REPAIR
The Bosch SMU 2000/4000 series dishwashers
requiresno special care other than the care and clean-
ing noted above. If service becomes necessary, contact
your dealer or installeror the BoschAuthorized Service
Contractor in your area. Do not attempt to repair the ap-
pliance yourself. Any work performed by unauthorized
personnel may voidthe warranty.
If you are having a problem with your BOSCH dish-
washer and are not pleased with the service you
have received:
• First please contact your installer or the Bosch
Authorized Service Contractor in your area and explain
to them why you are not datisfied. This will usually cor-
rect the problem.
• If after working with your installer or serviceman the
problem still has not been resolved to your satisfaction,
please let us know by either writing to us at,
Robert Bosch Corporation
Dept. HPS
2800 South 25th Ave.
Broadview, IL 60153
or,
calling us at,
1-800/944-2904.
Please be sure to include, if writing, or have available, if
calling, the following information:
> Model Number
> Serial Number
> Date of Original Purchase
> Date Problem Originated
> Explanation of Problem
11
