12
1.Multifunction control panel
Connect white/red wire to the red “wired wall
control” quick connect terminal and the white wire
to the white “wired wall control” quick connect
terminal.
2
.The Protector System™ (IR Beams)
Connect both white wires to the white “safety beam”
quick connectterminal and both white/black wires to
the grey “safety beam” quick connect terminal.
19
1. Model 84330AML 1 channel transmitter
2. Model 84335AML 3 channel mini transmitter
3. Model 8747AML Keyless entry system
4. Model 845AML Multi-function control panel
5. Model 760AML Outdoor keyswitch
6. Model 1702AML Keyed outdoor emergency release
7. Model 770AML The Protector System
TM
(IR Beams)
ACCESSORIES
20
SPECIAL FEATURES
Transmitter wall mount bracket
• Attach bracket to wall using the two flat head screws
provided.
• Slide the transmitter onto bracket.
• Fix the warning against entrapment label near the wall control
(refer section 15).
NOTE: Do not over tighten screws, allow enough clearance to
slide transmitter down onto the bracket.
