Header Wall
•Header Bracket
Idler Pulley
mHSTALLATION STEP 3
Attach the Rail to the Header Bracket
NOTE: (Optional) With some existing installations, you
may re-use the old header bracket with the two plastic
spacers included in the hardware bag, Place the spacers
inside the bracket on each side of the rail, as illustrated
• Position the opener on the garage floor below the
header bracket Use packing material as a protective
base NOTEE'.ff the door spring is in the way, you will
need helpo Have someone hold the opener securely on
a temporary support to allow the rail to clear the spring
• Position the rail bracket against the header bracket
= Align the bracket holes and join with a clevis pin
as shown
• Insert a ring fastener to secure_
Bracket
Existing
Header Bracket
0
Garage
Door
Spacer
Mounting
Hole
OPTION WITH
SOME EXISTING
INSTALLATIONS
Opener Ca_on or
Suppo_
HARDWARE SHOWN ACTUAL SIZE
0
Cle_s Pin 5tt 6"xt-1/2 _ Ring Fastener
14
