COMPAQ IPAQ PCD-1 3
2. Place the rechargeable batteries that came with your PCD-1 into the battery compartment
according to the diagram inside the compartment.
Tip: To recharge the batteries that came with your PCD-1, just plug the PCD-1 into a standard
electrical outlet while the batteries are in the battery compartment. The battery icon on the display
screen shows the amount of charge held by the batteries (when the PCD-1 is not plugged into an AC
electrical outlet).
WARNING: Do not mix rechargeable batteries with non-rechargeable batteries.
Turning On Your PCD-1
To turn on your iPAQ Personal CD Player PCD-1, press the Power button.
When you turn on your PCD-1, the LCD screen briefly displays Compaq iPAQ PCD-1, followed by the
message “Reading Disc.” If there is no disc loaded, you will receive the message “No Disc.” If a disc is
loaded, you will receive the message “Searching for audio.” If audio files are present, the PCD-1 will
list the number of tracks found then begin playing the first track. If no audio tracks are found, it will
display the message “No Audio Found.”
