1.800.423.0698 www.cookshack.com info@cookshack.com
Fast Eddy’s Model FEC500 8 Ver. 06.2
• 110 Volt, 60 Hz, single phase, 4 amp service required.
• A 15 amp fuse is required on the control panel.
• Rotisserie motors are ¼ hp. Convection fans are ¼ hp each.
• The fire box igniter elements are 200 watts.
• Auger motors and burner induction fans are 25 watts each.
MAINTENANCE
• Clean ash from unit weekly.
• Clean pellet slide frequently to prevent pellets from jamming before they enter the burner pots.
• Grease rotisserie bearings using 2-3 squirts of high temperature bearing grease every 1-2 weeks.
• Oil the fan motors with 2-3 drops of 3 in 1 oil every 6 months.
• Lubricate chain every 6 months.
• Check chain tension and belt tension every 6 months.
• Oil auger motors and draft fans with 3 in 1 oil every 6 months.
• Clean the racks and inside cooking chamber with degreaser and power-wash weekly. (Recommended
cleaner is Zep FS10184 Degreaser.) NOTE: PROTECT ALL ELECTRICAL COMPONENTS
FROM MOISTURE DURING THIS PROCESS
• If the grill is stored outdoors care should be taken to insure that water does not get into the hopper.
Wood pellets expand greatly when wet and may jam the auger system. A vinyl cover for the hopper is
highly recommended.
• Brush both sides of the interior convection fan blades every 30 days.
• Use 5” flue brush and sweep flue every 30 days.
