12
MAKING COFFEE
Selecting the coee taste
The appliance is set by default to make coee with a standard
taste. You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the button (g. 11) repea-
tedly until the required taste is displayed.
Selecting the quantity of coee in the cup
The appliance is set by default to make a standard quantity of
coee. To select the quantity of coee, press the
button (g. 12) until the message corresponding to the required
quantity of coee is displayed:
Coee selected Quantity in cup (ml)
MY COFFEE Programmable:
from ≃20 to ≃180
SHORT
≃40
STANDARD
≃60
LONG
≃90
EXTRA LONG COFFEE
≃120
Customising the “my coee” quantity
The appliance is set by default to automatically deliver 30 ml of
“MY COFFEE”. To modify this quantity, proceed as follows:
1. Place a cup under the coee spouts (g. 13).
2. Press the button (g. 12) until “MY COFFEE” is
displayed.
3. Keep the button (g. 17) pressed until the message
“1 MY COFFEE Program quantity” is displayed and coee
delivery begins. Release the button.
4. As soon as the coee in the cup reaches the required level,
press the button (g. 17) again.
The quantity of coee in the cup set has now been programmed.
The programmed quantity is doubled for the button.
Adjusting the coee mill
The coee mill is set by default to prepare coee correctly and
should not require regulating initially.
However, if after making the rst few coees you nd that the
coee is either too weak and with not enough ‘crema’ or delivery
is too slow (a drop at a time) and the coee is very strong, this
can be corrected by adjusting the grinding adjustment dial (g.
14).
Please note!
The grinding adjustment dial must only be turned when the
coee mill is in operation.
If the coee is delivered too slowly or
not at all, turn one click clockwise to-
wards “7”.
For fuller bodied coee with more
‘crema’, turn one click anticlockwise to-
wards “1” (do not turn more than one
click at a time otherwise the coee could
be delivered a drop at a time). These adjustments will only be
evident after at least 2 cups of coee have been delivered. If
this adjustment does not obtain the desired result, turn the dial
another click.
Tips for a hotter coee
For hotter coee, you should:
• perform a rinse cycle, selecting the “Rinsing” function in
the settings menu (page 10).
• warm the cups by rinsing them with hot water (using the
hot water function);
• increase the coee temperature in the settings menu
(page 11).
Making coee using coee beans
Important!
Do not use caramelised or candied coee beans as they could
stick to the coee mill and make it unusable.
1. Fill the container with coee beans (g. 15).
2. Place under the coee spouts:
- 1 cup, if you want to make 1 coee (g. 13);
- 2 cups if you want 2 coees (g. 16).
3. Lower the spout as near as possible to the cups (g. 16).
This makes a creamier coee.
4. Press the button corresponding to the number of coees
required (1 cup or 2 cups ).
5. Preparation begins. The amount of coee selected is di-
splayed together with a progress bar which gradually lls
as preparation progresses.
Please note:
• While the machine is making coee, delivery can be inter-
rupted at any moment by pressing any button.
• At the end of delivery and within 3 seconds, press and hold
one of the coee buttons to increase the quantity of coee
in the cup ( or ) (g. 17).
Once the coee has been made, the appliance is ready to make
the next drink.
