Chapter 1 Introduction|
1-2 Revision May 2008, ME14, SW V3.04
1.1 Receiving and Inspection
This VFD-M AC motor drive has gone through rigorous quality control tests at the factory before
shipment. After receiving the AC motor drive, please check for the following:
Check to make sure that the package includes an AC motor drive, the User Manual/Quick Start
and CD, and rubber bushings.
Inspect the unit to assure it was not damaged during shipment.
Make sure that the part number indicated on the nameplate corresponds with the part number
of your order.
1.1.1 Nameplate Information
Example of 1HP 230V AC motor drive
MODE :VFD007M23A
INPUT :3PH 200-240V 50/60Hz 6.0A
OUTPUT :3PH 0-240V 5.0A 1.9kVA 1HP
Freq. Range:0.1~400Hz
007M23A0T0011230
03.04
AC Drive Model
Input Spec.
Output Spec.
Output Frequency Range
Bar Code
Serial Number
Software Version
1.1.2 Model Explanation
VFD
M Series
007
Applicable motor capacity
Series Name
007: 1 HP(0.7kW)
022: 3 HP(2.2kW)
037: 5 HP(3.7kW)
055: 7.5HP(5.5kW)
004: 0.5 HP(0.4kW)
075: 10HP(7.5kW)
A
Version Type
23
Input Voltage
21:Single phase 230V
23:Three phase 230V
43:Three phase 460V
11:Single phase 115V
53:Three phase 575V
1.1.3 Series Number Explanation
Production number
Production year 2005
Production factory
01
Production week
T
(Taoyuan)
D007M23A0
Model
230V 3-phase 1HP(0.75kW)
If the nameplate information does not correspond to your purchase order or if there are
any problems, please contact your distributor.
