A SERVICE OF

logo

Open as PDF
next previous
17
E
Right switch (fig. 9)
1) Switch for ENGINE STOP, two positions:
position (RUN) = run.
position (OFF) = stop.
Warning
This switch is mainly intended for use in
emergency cases when you need to stop the engine
quickly. After stopping the engine, return the switch to
the position to enable starting.
Important
Stopping the engine using switch (1) after riding
with the lights on and leaving the ignition key in the ON
position, may run the battery flat as the lights will remain
on.
2) Button = engine start
Throttle twistgrip (fig. 9)
The twistgrip (3) on the right handlebar opens the
throttles. When released, it will spring back to the initial
position (idling speed).
4
5
1
2
3
fig. 9
Front brake lever (fig. 9)
Pull in the lever (4) towards the twistgrip to operate the
front brake. The system is hydraulically operated and you
just need to pull the lever gently.
The brake lever is provided with a dial adjuster (5) for
lever distance adjustment from twistgrip on handlebar.
Warning
Please read the instructions on page 32 before
using these controls.