VCR functions Others
31
Recording
Basic recording
Recording
Playing discs Editing
Before you start
Connections Getting started
Changing the SETUP menu
Note
• Recording starts immediately
and continues until the disc is
full or you stop recording.
• When the clock setting has
not been made, the space for
a date and time of title names
in the original or playlist will
be blank.
•You cannot mix two formats
on one DVD-RW disc.
When you load a disc once
recorded before, the record-
ing format cannot be changed
even if you change it in
SETUP menu.
•You cannot change the
recording speed during the
REC pause mode.
•You can change a channel
during the REC pause mode.
Follow the steps below to record
TV programs.
First:
1
Turn on the unit and load a
recordable disc.
Make sure that the TV input is set
on the unit.
2
Select a recording speed
using REC SPEED button.
Refer to “Recording speed” on
page 26.
3
Make sure that the recording
format is set to the desired
mode.
Refer to “Formatting a disc” on
pages 28-30.
When a DVD-RW disc is
loaded:
Yo u can choose Video mode or
VR mode from SETUP menu.
“Video mode” has been selected
as the default. Refer to “Choosing
the recording format of a blank
disc” on pages 28-29.
When a DVD-R disc is loaded:
DVD-R discs will always be in
Video mode.
4
Select a desired channel to
record using CH K / L but-
tons or number buttons.
5
Press REC/OTR button to
start recording.
I mark will be displayed for 5
seconds.
To pause the recording, press
PAUSE F button. Press REC/OTR
button to restart the recording.
6
Press STOP C button to stop
the recording.
This operation may take a
while to be completed.
TIMER PROG.
