Dubbing Mode
Recording
Recording
Playing discs Editing
Before you start
Connections Getting started
Changing the SETUP menu
VCR functions Others
39
You can copy a DVD disc to a
videotape or copy a videotape to
a DVD disc.This function will be
possible only if the DVD disc or
the tape is not copy protected.
Before starting this function, pre-
pare for the recording on the
DVD-R/RW disc or the videotape.
Refer to pages 31-32, 94.
Make sure:
• Insert a disc and a tape with a
safety tab.
Note for recording to a tape:
• The tape's record tab is intact.
• The videotape is long enough to
record the DVD disc.
Note for recording to a disc:
• The DVD disc is compatible
with the recording mode. Refer
to pages 26-27.
1
Press SETUP button to dis-
play SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
2
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
3
Select “Recording” using K /
L / { / B buttons, then press
ENTER button.
Recording menu will appear.
4
Select “Dubbing Mode” using
K / L buttons, then press
ENTER button.
Option window will appear.
TIMER PROG.
1
2
3
4
Instructions continue on page 40.
Note
For VCR to DVD duplication:
•After starting VCR to DVD
duplication, the picture may be
distorted because of the auto
tracking function.
This is not a malfunction. Be
advised to playback the tape
until the picture is stabilized,
then set the starting point
which you wish to start
recording, and start VCR to
DVD duplication.
