EPSON EPL-N2700 Rev. A
Chapter 4 Disassembly/Assembly 88
4.1 Overview
4.1.1 Precaution
Observe the following instruction well before starting servicing.
4.1.2 Tools
The tools used to disassemble/assemble this printer are as listed below:
Table 4-1. Tool List
WARNING
Before servicing, turn the printer power off and
unplug the power code from the AC socket.
Before removing the fuser and nearby parts, turn the
printer off and wait for at least 30 minutes to lower the
fuser temperature.
Since the printer weighs 30 Kg, be sure to carry the
printer with 2 people.
CAUTION
Before starting servicing, make sure the following
points:
Interface cable is disconnected from the back of the
printer.
No option is installed on the printer.
Wear the wrist strap to release static electricity so
you can avoid damaging static electricity sensitive
components.
Name Availability Code
Phillips screw driver A
*1
*1:A = Available on the market
B743800100
Phillips screw driver A B743800500
Standard driver A B743000100
Tweezers A B641000100
Pillars A B740400100
