4-1
4
Once you’ve installed the EPSON Stylus RIP software on your
computer(s), you’re ready to print in PostScript. To print with
the EPSON Stylus RIP, you need to start the RIP, set printing
options, print from your application,
and let the RIP process
send it to your printer. You can then use the EPSON Stylus RIP
window to monitor your print jobs, manage the print queue, or
run a batch of print jobs at the same time.
Here’s what this chapter covers:
◗ Printing from a Windows application and setting printer
and output options
◗ Managing print jobs
◗ Network printing
◗ Configuring the EPSON Stylus RIP application
Printing from an Application
When you want to print PostScript documents, you must first
start the EPSON Stylus RIP software. Then you print via the
PostScript driver, which automatically stores your print job as a
file on your hard disk. The RIP then automatically processes
the print job and sends it to your printer.
Printing wit
EPSON Stylus
RIP for Windows
Nflight.bk Page 1 Friday, September 1, 2000 8:32 AM
