A SERVICE OF

logo

Open as PDF
next previous
24
V5.1‐March2010
3. Press the F2 key to select 1 sec, 2 sec, 5 sec, infinite or OFF. Select a 1, 2,
or 5 second waveform display duration as desired. When Infinite is selected
the waveform will remain on the screen indefinitely. When OFF is selected, the
Persistence function has no effect on displayed waveforms.
Refer to Figure 14.
Figure 14: Persistence Mode to Observe Dynamic Signals
USINGPEAKDETECTIONTOCAPTUREGLITCHES
Use Peak Detect to display events (glitches or other asynchronous waveforms) down
to 50 ns (nanoseconds).
1. Press the MENU key; the function menu will appear at the right side of the
screen.
2. Press MENU ▲ or MENU ▼ to select the ACQU MODE. Four (4) selectable
options will appear at the bottom of the screen.
3. Press the F2 key to select Glitch Detect.
Refer to Figure 15.