
VNS104 Operation
This section describes the process for decoding content using the VNS104
Multi-Stream Decoder. Topics that are covered include:
• VNS104 Multi-Stream Software Decoder
• VNS104 Display Format and Scaling Modes
• VNS104 Device Name
• Multiple Controller Domains
VNS104 Multi-Stream Software Decoder
The VNS104 Software Decoder provides viewing of up to four live PURE3 streams from
VN-Matrix Series encoders that are on the same network. You can also view up to four
PURE3 recorded streams that are in active playback on the same network. Before you
can view content from the encoders, you need to congure the software and connect to
the VN-Matrix Enterprise Controller that is controlling the other devices on the network
(see VNS104 Configuration on page8).
If the VNS104 is correctly congured during installation, it automatically connects to the
Enterprise controller. The Enterprise controller congures the VNS104 software to run in
the same mode as it was in when last used.
Figure 15. VNS104 Connected to Enterprise Controller (Splash Screens Only)
13VNS104 Multi‑Stream Decoder • Operation