GPSMAP 392/398/492/498 Owner’s Manual 31
MAIN PAGES > MAP PAGE
To show and select the Map Page options:
1. Press ADJ/MENU.
2. Use the ROCKER to highlight an option, and press ENTER.
The available options are Measure Distance, Show/Hide Detail,
and Setup.
NOTE: Map Pointer, Highway, Location, and Sonar field
options are only available on medium and large sized data
fields.
Measure Distance—measures the bearing and distance between
any two points on the Map Page.
Hide/Show Detail—hides and shows map details.
To measure the bearing/distance between two points:
1. Highlight Measure Distance, and press ENTER. An
on-screen map pointer labeled ENT REF appears on the
Map Page at your present location.
2. Move the map pointer to a reference point (the point that
you want to measure from), and press ENTER.
3. Move the map pointer to the end measurement point. The
bearing and distance from the reference point and map
pointer coordinates is shown in the data window at the top
of the screen. Press QUIT to finish.
Map pointer
Map pointer
coordinates
Distance
and bearing
