User’s manual SEAT Portable System
Car info - 113 -
11.2 Status
The navigation device can show two round instruments. You can
configure which instruments are shown.
11.2.1 Opening the Status window
1. If necessary, tap on (Main menu) to open the START
window.
2. In the S
TART window, tap on Car info > Status.
The STATUS window opens. Two round instruments appear.
11.2.2 Configuring the Status window
The navigation device can show the following instruments:
► RPM gauge
► Coolant temperature
► Outside temperature
Note: It is possible that your vehicle does not support all the
instruments which can be shown by the navigation device. In this case
the selection will be limited.
1. In the STATUS window tap on Options > Gauge 1 to configure the
left round instrument.
- or -
► In the STATUS window tap on Options > Gauge 2 to configure the
right round instrument.
- or -
► In the STATUS window tap on the round instrument which you want
to reconfigure.
The G
AUGE 1 or GAUGE 2 list opens. It contains all the instruments
which can be shown. The instrument currently presented is marked.
2. Tap on the instrument which you want to be shown.
3. Tap on OK.
