A SERVICE OF

logo

Open as PDF
next previous
190-01255-00 Rev. B
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
114
AUDIO PANEL AND CNS
AUTO-TUNING NAV FREQUENCIES ON APPROACH ACTIVATION
NOTE: The primary NAV frequency is auto-tuned upon loading a VOR or ILS/Localizer approach.
NOTE: When an ILS/LOC approach has been activated while navigating by GPS, the system automatically
switches to LOC as the final approach course is intercepted (within 15 nm of the FAF). See the Flight
Management Section for details.
NAVfrequenciesareautomaticallyloadedintotheNAVFrequencyBoxonapproachactivation.
WhenloadingoractivatingaVORorILS/LOCapproach,theapproachfrequencyisautomaticallytransferred
to a NAV frequency field as follows:
•If thecurrent CDInavigation source isGPS, theapproach frequency istransferred tothe NAV1 active
frequencyeld.ThefrequencythatwaspreviouslyintheNAV1activefrequencyeldistransferredto
standby.
•IfthecurrentCDInavigationsourceisGPS,andiftheapproachfrequencyisalreadyloadedintotheNAV1
standby frequency field, the standby frequency is transferred to active.
•IfthecurrentCDInavigationsourceisNAV1orNAV2,theapproachfrequencyistransferredtothestandby
frequencyeldsoftheselectedCDINAVradio.