GPSMAP 292/298 Owner’s Manual 63
MAIN MENU > MAP TAB
Source Sub Tab
• Basemap—On, Off: turns the built-in base map on or off.
• Advanced—On, Off: turns all optional BlueChart/
MapSource data loaded on the data card on or off. The
Advanced option box shows a list of the optional BlueChart/
MapSource data loaded on the data card. Each area is
described by name and can be deselected if you do not want
to show the data on the Map Page.
To show the Advanced Map Card Setup:
1. Highlight the Advanced option box, and press ENTER.
2. Use the ROCKER to scroll through the list of map family.
Press ENTER to view all of the maps within a map family.
3. To select or deselect a map, highlight the check box to
the left of the name of a map. Press ENTER to select or
deselect the map. The map is selected and appears on the
Map Page when a check mark appears in the box adjacent
to that map.
4. To show detailed information and notes for each area,
highlight a name, and press ENTER. To view the notes for
that area, choose Show Notes. To scroll through the notes,
highlight the notes, press ENTER, and use the ROCKER
to scroll up, down, left, and right, or press ADJ/MENU and
choose a scroll option.
NOTE: The Advanced Map information is only available
when you have a data card with additional map data, such as
BlueChart g2, installed in the unit.
