A SERVICE OF

logo

-18-
G0572 Hanging Air Filter with Remote
Figure 12. Flange bracket mounting holes and
lip.
Lip
Mounting
holes
Figure 14. Flange correctly installed under lip.
4. Install the flat washers and the hex bolts to
secure the flange brackets to the unit (
Figure
14).
5. Repeat Steps 3 & 4 for the other three flange
brackets.
6. With the help of an assistant, position the air
filter on the wall or ceiling, and screw or bolt
the unit in place.
Flange Bracket
Mounted Under Lip
Flange Bracket
2. Drill the bolt pattern to accept at least
1
4" lag
bolts for studs; or use
1
4" nuts, bolts, and
washers for mounting to supports.
3. Position the flange bracket under the air filter
unit lip at the mounting hole location (
Figure
12). For permanent table-top mounting, use
the lower-lip holes (
Figure 13).
Figure 13. Lower-lip mounting holes.