To remove a chuck or faceplate from the lathe
spindle:
1.
2.
Removing/Installing
Chuck or Faceplate
To install the chuck or faceplate:
1.
2.
Figure 16
PINCH HAZARD! Protect
your hands and preci-
sion ground bedways
with plywood when
removing lathe chuck!
The heavy weight of a
falling chuck can cause
serious injury.
Figure 17.
3.
4.
Note:You may need to tap the chuck/face-
plate with a rubber mallet to brake it free of
its seal.
3.
Figure 17
Figure 16.
