Figure 27
Threading Chart:
Figures 25
– 26
Gear Charts
Figure 25.
Figure 26.
Figure 27
Figures 25 & 26
For example if you wanted to cut a
1
⁄2" x 13
thread on a piece of round stock.
1.
2.
3.
4.
5.
NOTICE
There are many details to thread cutting
and other lathe operations. It is not within
the scope of this manual to cover detailed
information regarding types of cutting tools,
cutting speeds and working with different
types of metal. If you do not have training
in this area you MUST seek training from a
qualified person before proceeding!
Figure 27.
Change Gears
