A SERVICE OF

logo

Port-Based Virtual LANs (VLANs) and GVRP
GVRP
CLI: Viewing and Configuring GVRP
GVRP Commands Used in This Section
show gvrp below
gvrp page 11-45
unknown-vlans page 11-45
Displaying the Switchs Current GVRP Configuration. This command
shows whether GVRP is disabled, along with the current settings for the
maximum number of VLANs and the current Primary VLAN. (For more on the
last two parameters, see
Port-Based Virtual LANs (Static VLANs) on page
11-3.)
Syntax: show gvrp Shows the current settings.
Figure 11-29. Example of Show GVRP Listing with GVRP Disabled
This example includes
non-default settings for
the Unknown VLAN field
for some ports.
Figure 11-30. Example of Show GVRP Listing with GVRP Enabled
11-44