A SERVICE OF

logo

Switch Meshing
Configuring Switch Meshing
The asterisk indicates
that you must reboot the
switch to cause the
Mesh configuration
change to take effect.
Figure 14-9. After Saving a Mesh Configuration Change, Reboot the Switch
8. Press
to return to the Main menu.
9. To activate the mesh assignment(s) from the Main menu, reboot the
switch by pressing the following keys:
a. (for Reboot Switch)
b. Space bar (to select Yes).
c.
(to start the reboot process).
(The switch cannot dynamically reconfigure ports to enable or disable mesh-
ing, so it is always necessary to reboot the switch after adding or deleting a
port in the switch mesh.)
14-13