Information Menu 27
SNMPv3 USM User Table information
Command: /info/sys/snmpv3/usm
usmUser Table:
User Name Protocol
-------------------------------- --------------------------------
adminmd5 HMAC_MD5, DES PRIVACY
adminsha HMAC_SHA, DES PRIVACY
v1v2only NO AUTH, NO PRIVACY
The User-based Security Model (USM) in SNMPv3 provides security services such as authentication
and privacy of messages. This security model makes use of a defined set of user identities displayed
in the USM user table. The USM user table contains information like:
• the user name
• a security name in the form of a string whose format is independent of the Security Model
• an authentication protocol, which is an indication that the messages sent on behalf of the user
can be authenticated
• the privacy protocol.
The following table describes the SNMPv3 User Table information.
Table 9
User Table parameters
Field Description
User Name
This is a string that represents the name of the user that you can use to access the switch.
Protocol
This indicates whether messages sent on behalf of this user are protected from disclosure
using a privacy protocol. Switch software supports DES algorithm for privacy. The
software also supports two authentication algorithms: MD5 and HMAC-SHA.
SNMPv3 View Table information
Command: /info/sys/snmpv3/view
View Name Subtree Mask Type
----------------- ---------------------- ------------- --------
iso 1 included
v1v2only 1 included
v1v2only 1.3.6.1.6.3.15 excluded
v1v2only 1.3.6.1.6.3.16 excluded
v1v2only 1.3.6.1.6.3.18 excluded
The user can control and restrict the access allowed to a group to only a subset of the management
information in the management domain that the group can access within each context by specifying
the group’s rights in terms of a particular MIB view for security reasons.
