A SERVICE OF

logo

Open as PDF
next previous
ACRO 29
3.5 Copy Select Function (System Set-Up Mode)
The Copy Select Function enables you to copy all of the settings
of your current model to another memory (model number) within
the same transmitter. This is very useful when setting up one
aircraft several different ways.
model names
(if dot is shown, model
name is blank)
existing model
number
model number to be
transferred to.
3.6 Model Names (System Set-Up Mode)
This function is used to input model names individually. Each
model’s name is displayed in the normal screen automatically.
when that model is selected. To avoid confusing models,
inputing model names is recommended. You can input a
maximum of 8 characters for each model name.
In the System Set-Up Mode, select the Model Name Function
using the UP or DN key. Once selected, simultaneously press the
UP and DN keys to access.
model number
modulation
model type
letter position being
inputed
DN
SELECT
CH CH CLEARUP
Press UP and DN keys
simultaneously to exit the
System Set-Up Mode
Press the Select key to
access the copy function
in Model Select mode
To Model Name function
To Spoiler Channel input
selection function
Function select
(select model/copy)
Model selection —
use to select model
to be copied to
Activate copy
function
DN
SELECT
CH CH CLEARUP
Press UP and DN keys
simultaneously to exit the
System Set-Up Mode
Press the DN and Select keys
simultaneously to access the
System Mode info display
(8 characters)
To Model Type Selection
function
To Model Select/Copy
function
Press to change
input letter at arrow
Press to change
input letter arrow
position
Changes input letter
to blank space only
where arrow is
located