A SERVICE OF

logo

Open as PDF
next previous
ACRO 54
The XP8103 offers two separate types of timer functions —
countdown and stopwatch. In the countdown mode, the
transmitter will beep at 30 seconds. At zero, the time will begin
counting up with a + indication. Up count will count up to
59:59 (59 minutes 59 seconds).
Count start and stop operations are activated by the snap
roll/trainer switch. But when using it as the trainer’s master
transmitter, start/stop by this switch is inhibited.
Accumulated Time (Integrated)
Accumulated time is for each model and returns to zero at 100
hours. You can use them as individual model’s maintenance
hours.
4.16 Timer (Function Mode)
Accumulated time
minutes
hours
Countdown timer setting
time (0.00 to 59.50)
Inhibit
Countdown Timer
Stopwatch
Timer setting time
NORMAL DISPLAY w/countdown timer function selected
Press to reset timer
to zero
DN
SELECT
CH CH CLEARUP
Press either key
to start/stop timer
Press the UP and DN keys
simultaneously to enter/exit
the Function Mode
Press the DN and Select keys
simultaneously to access the
Function Mode List Display
Press to select
Timer Setting:
↓
INH
↓
Countdown Timer
↓
Stopwatch
DN
SELECT
CH CH CLEARUP
To Servo Output
Indicator
To Trainer
function
Press either key
to move arrow
Press to inhibit
Timer function or
to set Integ-T
value to 0
or to increase or decrease
countdown timer settings
Press to move
cursor from timer
to Integ-T