A SERVICE OF

logo

12-18 S TEERING
Reverse System
Pull the holder [A] off the cable bracket.
Remove the right side cover (see Hull/Engine Hood chap-
ter).
Unscrew the bolts [A] and remove the cable bracket.
NOTE
The collors on the inside of the hull will drip down when
the bolts are removed.
Remove the ball joint [A] and cable bracket [B] from the
shift cable [C].
Cut off the band [A] holding the shift cable [B] and inlet
cooling hose [C] for the oil cooler.
Cut off the band [A] holding the shift cable [B].
Bow [C]