
1414 15
Return to the Top page
Basic Operations
Return to the Top page
Basic Operations
SD card
DNX7210BT: Press the <0>
button for 1 second to open the
front panel.
0
The panel fully opens.
DNX5210BT/ DNX5510BT:
Detach the front panel.
NOTE
•Forhowtodetachthepanel,seeDetaching The
Front Panel (P.15).
Hold the SD card as the diagram
below and insert it into the slot
until it clicks.
Notchedsection
Labeledside
The unit loads the card and playback
starts.
● To remove:
Push the SD card until it clicks and then
remove your finger from the card. The
card pops up so that you can pull it out
with your fingers.
External device
Insert the plug into the AV-IN jack.
1
2
1
Detaching The Front
Panel
Youcandetachthefrontpaneltoprevent
theft.
Press the <0> button for
1 second to open the front panel.
0
NOTE
•Youcansetthefrontpaneltoopenautomatically
whentheignitionisturnedoff.SeeMonitor
angle control (P.74).
Detach the panel as the diagrams
below.
2
3
1
4
NOTE
•Theattachingplateclosesautomaticallyinabout
10secondsafterthefrontpanelisreleased.
Removethepanelbeforethishappens.
Detach the panel as the diagrams
below.
1
2
● After detaching:
Putthepanelintheprotectivebag
suppliedwiththeunit.
NOTE
•Topreventdeterioration,donottouchthe
terminalsoftheunitandfaceplatewithyour
fingers.
•Iftheterminalsontheunitorfaceplategetdirty,
wipethemwithacleansoftdrycloth.
1
2
1