KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your Seamless Switcher / Scaler
6
# Feature Function
21
ENTER Button Moves to the next level in the OSD screen
22
MENU Button Displays the OSD Menu screen
1
and locks/unlocks the front panel
2
23
DVI Press
3
to select the DVI / audio source and illuminate the DVI LED
24
VGA Press
3
to select the VGA / audio source and illuminates the VGA LED
25
Component
Press
3
to select the component video/audio source and illuminate the
component LED
26
YC2 Press
3
to select the s-Video (Y/C) / audio source 2 and illuminate the YC2 LED
27
YC1 Press
3
to select the s-Video (Y/C) / audio source 1 and illuminate the YC1 LED
28
AV2 Press
3
to select the composite video / audio source 2 and illuminate the AV2 LED
29
INPUT SELECTOR
AV1 Press
3
to select the composite video / audio source 1 and illuminate the AV1 LED
Table 2: Rear Panel VP-719DS, Seamless Switcher / Scaler Features
# Feature Function
1 VIDEO HD15
Connector
Connects to the video acceptor (for example, Plasma display,
projector or monitor) that displays the scaled output (with the OSD
superimposed over it)
2
OUTPUTS
AUDIO L and R RCA
Connectors
Connects to the left and right stereo audio acceptors
3 COMPONENT L and
R RCA Connectors
Connects to the left and right stereo audio inputs from the
COMPONENT video source
4 VIDEO 2 L and R
RCA Connectors
Connects to the left and right stereo audio inputs from one of the
composite or s-Video sources
4
5 VIDEO 1 L and R
RCA Connectors
Connects to the left and right stereo audio inputs from one of the
composite or s-Video sources
5
6
AUDIO INPUTS
PC 3.5 mm Socket Connects to the audio input from either the DVI (digital video
interface) graphics source or the VGA analog graphics source
7 DVI Connector Connects to the DVI (digital video interface) graphics source
8 VGA HD15 Connector Connects to the VGA (analog interface) graphics source
9 Y
10
Pb/Cb
11
Component
RCA
Connectors
Pr/Cr
Connect to the component video source
6
12
YC 2 4p Connector Connects to the s-Video source 2
13
YC 1 4p Connector Connects to the s-Video source 1
14
CV 2 RCA Connector Connects to the composite video source 2
15
VIDEO INPUTS
CV 1 RCA Connector Connects to the composite video source 1
16
RS-232 DB 9 Connector Connects to PC or Serial Controller
17
Power Connector with FUSE AC connector enabling power supply to the unit
1 Or moves to the previous level in the OSD screen
2 See section 6.2
3 Press again (when the LED illuminates) to freeze the image; the LED flashes. Press once again (when the LED flashes), to
display a blank screen; the LED flashes more slowly. Alternatively, to freeze the image, press the FREEZE key on the
infra-red remote control transmitter (see Figure 42)
4 Either CV 2 or YC 2
5 Either CV 1 or YC 1
6 Or to an RGB signal; connect RED to the “Y” connector, GREEN to the “Pb/Cb” connector, and BLUE to the “Pr/Cr” connector
