Operating the Seamless Switcher / Scaler
25
7.3.6.4 Choosing the Seamless Switch Utility Settings
From the Seamless Switch Utility screen (see Figure 32), you can choose the
image transition speed Mode
1
, set the Background screen color
2
when there is
no active source (Black or Blue), and activate (finds the active source) or
deactivate (displays the source selected prior to power down) the Auto Search:
Figure 32: Seamless Switch Utility Screen
7.3.6.5 Choosing the OSD Utility Settings
From the OSD Setting Utility screen (see Figure 33), you can set the OSD
position, time out, size (see Figure 34), source prompt
3
(see Figure 35), and
choose the blank color
2
(blue or black - see Figure 36).
Figure 33: OSD Setting Utility Screen
1 FAST (an immediate switch, without checking the resolution. However, the image transition may appear unstable), SAFE (a
smooth image transition - the input resolution at the input is checked and outputted after a few seconds delay, but it takes
longer than fast) or MODERATE (between fast and safe)
2 You can select the screen color (black or blue) when there is no active source and also the “blank” screen color. For
example, blue, if no active source is found (<Seamless Switch> <Background> <Blue>); and a black blank screen (<OSD
Setting> <Blank Color> <Black>), when taking a break during a presentation
3 We recommend that you set the source prompt ON, when adjusting the system. During a presentation, set the source prompt
OFF to avoid the appearance of OSD screen labels
