•
•
•
•
•
Chapter 1
2
Step 2: Load the print media
Note:
See page 3 for instructions on loading banner paper.
1
Place the media against the right side of the sheet feeder.
Follow these guidelines when loading print media:
2
Squeeze the tab on the paper guide and slide the paper guide
to the left edge of the media.
Load up to: Make sure:
100 sheets of plain paper
•
The print side is facing you.
10 envelopes
•
The print side is facing you.
•
The envelopes are loaded vertically against the
right side of the sheet feeder.
•
The stamp location is in the upper left corner.
10 greeting cards, index
cards, or postcards
•
The print side is facing you.
•
The cards are loaded vertically against the right side of the sheet feeder.
25 transparencies
•
The rough sides of the transparencies are facing you (smooth side down).
25 iron-on transfers
•
You follow the instructions on the packaging to load the iron-on transfers.
20 sheets of banner paper
•
You follow the directions for printing banners on page 3.
100 sheets of custom size
paper
•
The print side is facing you.
•
Your paper size fits within these dimensions:
-
Width: 76 mm to 216 mm (3.0 in. to 8.5 in.)
-
Length: 127 mm to 432 mm (5.0 in. to 17.0 in.)
Paper guide
Sheet feeder
Paper alignment
marks
