Daft 2000/12/04
Faxing
24
2
If the Machine Cannot Detect the Size of Your Original
If the machine cannot detect the original size, the following display is shown:
If this happens, carry out the following steps.
A
Press
[
Exit
]
.
B
Remove the original and replace it on the exposure glass.
C
Press the
{
{{
{
Start
}
}}
}
key to scan the original again.
If the above display appears again, repeat steps A to C.
Note
❒ If the machine still cannot detect the original size, the following display is
shown:
❒ If this happens, carry out the following steps.
• Press the key to switch the scan size.
•Press the
{
Start
}
key again.
Original Sizes Difficult to Detect
The machine finds it difficult to detect the size of the following kinds of origi-
nals. If this happens, the receiving machine may not select print paper of the cor-
rect size.
⇒
P.24
“If the Machine Cannot Detect the Size of Your Original”
.
• Documents set on the exposure glass of sizes other than those listed in the ta-
ble below
• Originals with index tabs, tags, or projecting parts
