A SERVICE OF

logo

Open as PDF
next previous
INTRODUCTION AND SPECIFICATIONS
Product Overview
2 LDM-4990
CHAPTER 1
removal and hose connectors for cooling water and nitrogen purge. TO-Can
lasers are simply inserted into the socket under the access door on the top of the
mount. Once seated, and with the correct device selector in position, closing the
door locates and forces the diode against the hotplate. The LDM-4990 mount
allows direct interfacing to most ILX Lightwave current sources and temperature
controllers through standard ILX current and temperature control cables.
The LDM-4990 is intended for applications where a TO-can-type laser diode
needs to be tested and is especially suited for L-I-V testing over a wide range of
temperatures. For example, the 4990 would aid in experiments that measure
optical power output from a laser as a function of case or die temperature and/or
laser drive current.
Figure 1.1 Exploded View of LDM-4990