A SERVICE OF

logo

36 Setting The Audio Speaker Volume
MX7 User’s Guide E-EQ-MX7OGWW-C
Setting The Audio Speaker Volume
Note: An application may override the control of the speaker volume. Turning off sounds saves
power and prolongs battery life.
The speaker is located on the front of the device above the MX7 logo. The audio volume can be
adjusted to a comfortable level for the listener. The volume is increased or decreased one step each
time the volume key sequence is pressed. The device has an internal speaker and a jack for an
external headset. Operational “beeps” are emitted from the speaker.
Using the Keypad
Note: Volume & Sounds (in Settings) must be enabled before the following key sequences will
adjust the volume.
To adjust speaker volume:
Tap the Orange key then the Scan key to enter Volume change mode.
Use the Up Arrow and Down Arrow keys to adjust volume until the speaker volume is
satisfactory.
Press the Enter key to exit this mode.