E-EQ-MX7OGWW-C MX7 User’s Guide
Appendix B Regulatory Notices and Safety Information
FCC Information:
This device complies with FCC Rules, part 15. Operation is subject to the following conditions:
1. This device may not cause harmful interference
and
2. This device must accept any interference that may be received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction guide, may cause harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Warning: Changes or modifications to this device not expressly approved by LXE, Inc., could void the user’s authority to
operate this equipment.
EMC Directive Requirements:
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
Industry Canada:
This Class A digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is
subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouiller du Canada. Le present
appareil numérique n’emet pas de bruits radioélectriques dépassant les limites applicables aux appareils numeriques de le Classe
A préscrites dans le Reglement sur le brouillage radioélectrique édits par le ministere des Communications du Canada.
RF Safety Notice (Odyssey Client)
Caution
This device is intended to transmit RF (Radio-Frequency) energy. In order to comply with FCC and Industry
Canada radio-frequency exposure requirements for body-worn operations, this device should be used with
the Nylon Holster with Belt-Loop accessory (P/N: 159890-0001) in accordance with the user instructions.
This device may also be operated with body-worn holster and carry-case accessories that do not contain
metallic components and maintain a minimum separation distance of 1.5 cm between the back side of the
device (battery compartment side) and the user’s body. This device must not contain co-located transmitters.
Use of this device in a manner not consistent with these instructions can increase the risk of radio-frequency
exposure.
RF Safety Notice (Summit Client)
Caution
To comply with the FCC and Industry Canada radiation exposure requirements, use of this device for body
operational configurations is limited to tested configurations and approved by LXE Inc.
THIS MODEL DEVICE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO
WAVES.
Specific Absorption Rate or SAR testing was tested and certified to FCC and Industry Canada requirements
for safe exposure on this device. The tests are performed in positions and locations (e.g. next to the body) as
required by the FCC and Industry Canada. The FCC has granted an Equipment Authorization for this model
device with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines.
Notice:
The long term characteristics or the possible physiological effects of radio frequency electromagnetic fields have not been
investigated by UL.
