Reprogramming the grease filter
timer
The grease filter timer is preset to 30
hours. This time can be lengthened or
shortened to 20, 30, 40 or 50 hours.
–
A time of 20 hours should be
programmed in kitchens with
frequent pan or deep frying.
–
A time of 20 hours should also be
programmed if the kitchen is only
used occasionally to prevent grease
which has accumulated over a long
period of time from hardening on the
filter, making cleaning more difficult.
^ Press the On/Off button to turn off the
fan.
^
Press the Delayed Shut Down and
grease/charcoal filter button at the
same time.
The red indicator for the grease filter
timer and one of the "–/+" indicators will
flash.
The lit "–/+" indicator shows the
programmed time:
1st indicator from the left = 20 hours
2nd indicator from the left = 30 hours
3rd indicator from the left = 40 hours
4th indicator from the left = 50 hours
^
Use the "–/+" button to select the
desired time.
^ Store the selection by pressing the
grease/charcoal filter button.
If the procedure is not stored within
4 minutes of programming the hood
will automatically default to the "old"
data.
Operation
15
