A SERVICE OF

logo

a 3 protective shields
to prevent scratches to the chimney
during installation.
b 2 hose clips for securing the
ducting.
c 1 reducing collar
for use with 5" (125 mm) exhaust
ducting.
d Telescopic retaining plate secures
the chimney extension.
e Installation kit for recirculation
mode; contains diverter and hose
(optional accessory)
1 lever for dismantling the chimney
Installation instruction sheet
6 large headed screws5x40mm
for securing the retaining plates and the
canopy
(S8 wall anchors included in the
packaging are not for use in USA)
1 small headed screw5x40mm,
1 cap
for securing the canopy
2 M 6 locking nuts
for securing the unit
2 screws 3.9 x 7.5 mm
for securing the chimney
1 allen wrench
for adjusting the unit's height
Installation accessories
27