Utility Mode – Copy Functions
9
Di152f/Di183f 9-15
?
Have the necessary precautions been observed when entering the
paper size?
➜ Refer to the diagram at the right
and be sure to specify the paper
width and length measurements
correctly.
6
Using the 10-Key Pad, enter the
paper width (mm), and then press
the [Yes] key.
❍ The paper width can be set
between 3-9/16 inch (90 mm)
and 11-3/4 inch (297 mm).
However, when the width is set between 11-1/16 inch (280 mm)
and 11-11/16 inch (297 mm), the maximum length that can be set
is 16-1/2 inch (420 mm).
❍ If you wish to correct the setting, press the [No] key, and then enter
the new number.
The “PAPER SOURCE SETUP” menu appears again.
Width (y)
Length (x)
