16. SERVO AMPLIFIER CONNECTION
16.7 Precautions
16 - 45
9
MELSECNET/H
CONNECTION (PLC
TO PLC NETWORK)
10
MELSECNET/10
CONNECTION (PLC
TO PLC NETWORK)
11
CC-Link IE CONTROLLER
NETWORK
CONNECTION
12
CC-Link IE FIELD
NETWORK
CONNECTION
13
CC-Link CONNECTION
(INTELLIGENT DEVICE
STATION)
14
CC-Link
CONNECTION
(Via G4)
15
INVERTER
CONNECTION
16
SERVO AMPLIFIER
CONNECTION
16.7 Precautions
Station number setting in the servo system
Make sure to establish servo system with the station
number set with the host address.
For details of host address setting, refer to the
following.
16.4.1 Setting communication interface
(Communication settings)
GOT clock function
Since the servo amplifier does not have a clock
function, the settings of [Adjust] or [Broadcast] by GOT
clock control will be disabled.
Servo amplifier/test operation using the GOT
During the servo amplifier/test operation, when the
communication between the GOT and the servo
amplifier is interrupted for 0.5[ms] or more, the servo
amplifier decelerates, stops, and then gets into the
servo lock status. During the servo amplifier/test
operation, continue the communication constantly by
monitoring the status display of the servo amplifier on
the GOT screen, etc.
